All of the wheels shown below have been hand built following our Premium Hand Build process, which allows us to warranty them for the lifetime of the rim sidewalls. If you break a spoke or nipple, or lose spoke tension, or if trueness waivers by more than a millimetre either way, we will true or repair the wheel at no charge. If damage is caused by your own bravado, error, or stupidity, we will give you a serious discount on the repairs.

What makes Guywires Premium Hand Built Wheels better?
- Hub cone adjustment is set with compensation for quick release lever compression.
- Uneven rim joints have been dressed smooth to eliminate brake grab or shudder.
- Valve holes have been deburred.
- Nipples have been lubricated externally to prevent damage during build and to prevent seizing over time.
- Nipples have internal thread locking compound to prevent them from unwinding during use.
- Spokes are thoroughly stress relieved to reduce stretch during use, giving the wheel superior durability and lasting trueness.
- Spoke tension on all spokes is measured and balanced to within 8% variance of 100kgf (on drive side and front spokes - non-drive side spokes are necessarily lower in tension).
- Final tension checks are done with a Hozan professional tensiometer
- Dish (rim centering) is within 0.3mm from center.
- Lateral and radial trueness is within 0.2mm of variance.

- Limited LifetimeWarranty includes replacement of any broken spokes or nipples, retruing of wheels exceeding 1mm lateral or radial variance, repair or replacement of any defective parts. Warranty expires when the rim sidewalls wear out, or the wheel is damaged beyond use or repair.
- Wheels damaged due to rider error (abuse, misuse, accident, etc) will be repaired at a special discounted rate.

Guywires wheel building takes longer, and costs a bit more. You get what you pay for.
Well... actually, on this page, you get a lot more than what you pay for.

Prices are in Canadian dollars, and do not include shipping costs.

Track rear wheel,

Value ~$285 inc GST

New Track Wheel, rear,
Miche Primato high flange hub, 122mm wide, with track cog threading.
Wolber Aspin tubular rim, dark hard anodized.

Laced in Tornado pattern makes the wheel very stiff, similar to Tye&Soldering.
28 DT Swiss 15g spokes, Handbuilt by Guywires. 
Proof tested by national caliber track racer, Keith Bruneau. 
Stiff, strong, unique.

$185

No tax!

Road wheels, tubular, 700c

All new!

64% off !

Wolber Aubisque rims, Shimano Exage hubs, upgraded to 9speed freehub. 36 stainless spokes, each wheel. Handbuilt by Guywires cycle tech (limited lifetime warranty). Includes Wolber Strada tubeless tubular tyres. No QRs included.

Worth $420 retail

$150 pair

No tax!

24" MTB wheels

(true photo not available)

All new!

28% off

Guywires hand built, with stainless spokes, Shimano Exage QR hubs, Sun Mistral Chinook aluminum rims.
Fits 7 speed cassette, OR will upgrade to
8 - 9 speed for +$40

Regular retail $244 inc GST

$150 pair

No tax!

MTB disc brake pair, Sun Single Track, Shimano Deore M555. $337

MTB disc brake pair, Sun Rhyno Lite Welded, Shimano Deore M555. $273

MTB disc brake pair, Mavic M261, Shimano Deore M555. $259

MTB disc brake pair, ALL BLACK, Wolber AT18, black, black spokes and nipples, Shimano Deore M555, black. $369

MTB disc brake pair, Sun CR17a, Shimano Deore M555. $211

MTB 24", Araya RM-50, Shimano Exage. $148

20"disc brake pair, Alex DX2418, black, Shimano Deore M555. $225

As an additional service to buyers of these wheels, we have taken the extra time and effort to add extra quality to ensure long life and improved performance. Off-the-Rack wheels from a retailer will seldom include ANY of these extras, but we add them ALL to increase your value and ensure your satisfaction:

- Hubs have been fully grease packed to repel contamination.
- The correct number of bearing balls in the hubs has been verified. Did you know that Shimano factory sometimes leaves out 1 or 2 balls? Fewer balls means more wear to the remaining balls and cups.
- Hub bearings are precision adjusted for minimum wear, maximum life, and reduced rolling resistance.
- Both sides axle cones have been locked tightly to prevent loosening, which can damage the hub.
- Freehub bodies have been checked for tight fastening to hub bodies, to prevent future trouble.

- Premium Build features are also part of these Blowout Sale Wheels.
See the notes at top of page.